Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Ford
    3. :
  3. Focus
    4. : How to replace the diesel filter on the Ford Focus 1.5 TDCI

Ford Focus - Video tutorial

Model: Ford Focus MK 3 - Years 2011-2018
Part: Diesel filter
Operation: How to replace the diesel filter on the Ford Focus 1.5 TDCI

Let's briefly see the steps that will allow us to disassemble and replace the diesel filter of the Ford Focus 1.5 TDCI. First we open the bonnet of our car and begin to locate the diesel filter, which we find on the upper part of the engine compartment (to the left of the battery); then we disconnect the fuel lines and unscrew the fixing screws to remove it, disconnecting the electrical connector, as illustrated in the video. At this point we replace the filter cartridge with the new one; reassemble the diesel filter and make all the connections!


Posted on 5 April 2023 by ScegliAuto

    Frequently Asked Questions

    • Focus 2004-2011 - How much does it cost to replace the diesel filter on the Ford Focus 1.6 tdci? Read Answer
    • Focus 2004-2011 - How often should the Ford Focus diesel filter be changed? Read Answer
    • Focus 2004-2011 - How much does the Ford Focus fuel filter cost? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos