Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Ford
    3. :
  3. Focus
    4. : Focus replacing the fuel filter on Focus

Ford Focus - Video tutorial

Model: Ford Focus MK 1 - Years 1998-2004
Part: Petrol filter
Operation: Focus replacing the fuel filter on Focus

Do we want to replace the fuel filter on Ford Focus ourselves? We lift the car and see the disassembly of the fuel filter. Once the car is raised, we locate the fuel filter. With a socket wrench we unscrew the locking pins located near the container (disconnect the cables and the various tubes from the filter) where the filter is located. Once the filter has been removed, remove it from the car (replace it with a new filter). Finally we mount the filter to the attached container of the diesel filter (we connect pipes and cables) and tighten the appropriate pins. At the end of the assembly of the filter we just have to bring the car to the ground and carry out a test.


Posted on 6 February 2024 by ScegliAuto

    Frequently Asked Questions

    • Focus 2011-2018 - What is the location of the Ford Focus fuel filter? Read Answer
    • Focus 2004-2011 - How much is the petrol filter on the Ford Focus 1600 petrol? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos