Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the EGR Valve on a Ford Focus

Model: Ford Focus MK 3 - Years 2011-2018
Part: EGR valve

To remove the EGR valve from a Ford Focus, start by disconnecting the negative terminal of the battery. Open the bonnet and locate the EGR valve, positioned at the rear of the engine, connected to the intake manifold and exhaust. Remove any plastic engine covers. Carefully disconnect the electrical connector of the valve. Loosen and remove the securing bolts that hold it to the manifold using an appropriate socket wrench. Detach the pipes or ducts connected, taking care with the gaskets. Once free, extract the EGR valve. Before reassembly or replacement, check the condition of the gaskets and clean the mounting surface. Reassemble in reverse order, tightening the bolts properly and reconnecting the electrical connector.

Posted on 17 August 2026 by ScegliAuto

Video tutorial

Related tutorials

Replacing the EGR Valve on a Ford Focus
Replacing the EGR Valve on a Ford Focus
Ford Focus (2004-2011 / MK 2, Focus 2) The EGR valve should be replaced if damaged or if you have issues with your car, here’s how to remove it on a Ford Focus. Lift the engine bonnet and …
Removing the EGR Valve on the Ford Focus MK3 1.6 TDCI
Removing the EGR Valve on the Ford Focus MK3 1.6 TDCI
Ford Focus (2011-2018 / MK 3) In this guide, discover the steps to remove, clean, or replace the EGR valve on the third generation Ford Focus with a 1.6 TDCI engine. First, open t…
How to disassemble the EGR valve of the Ford Focus 1.6 TDCi
How to disassemble the EGR valve of the Ford Focus 1.6 TDCi
Ford Focus (2004-2011 / MK 2, Focus 2) Below we will see the main instructions on how to dismantle and replace the EGR valve of the Ford Focus 1.6 TDCi. First, we open the hood of the car …

Other guides you may be interested in

How to Bleed the Clutch on a Renault Clio?

To bleed the clutch on a Renault Clio, open the bonnet to access the components located in the engine bay: here, you will need to undo the screws that secure the battery in its housing, the intake manifold, and the coolant reservoir. This will allow you to locate the pipe through which the brake fluid flows: by inserting the other end of the pipe into a container, you can press the clutch pedal to expel all the fluid until it fills the container.

Watch the video!


by ScegliAuto

More videos