Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How do you disassemble the EGR valve in the Ford Focus 1.6 TDCi?

Model: Ford Focus MK 3 - Years: 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018
Part: EGR valve

See other generations:
Video tutorial

The EGR valve is a device installed in car engines, with the purpose of recovering a percentage of exhaust gases and injecting them into the intake manifold of the engine, in order to reduce harmful emissions. Over time, this tends to accumulate carbon residues, causing it to stop working as it should, so the only solution is to disassemble it and clean it. Regarding the Ford Focus, here is how to do the job: Open the hood, remove the windshield wipers and the protective strip underneath them, and locate the EGR valve, located near the windshield.

Remove the inlet and outlet pipes, disconnect the power cable connector, and remove the locking pins.


Posted on 14 February 2025 by ScegliAuto


Related tutorials

How to disassemble the EGR valve of the Ford Focus 1.6 TDCi
How to disassemble the EGR valve of the Ford Focus 1.6 TDCi
Ford Focus (2004-2011 / MK 2, Focus 2) Below we will see the main instructions on how to dismantle and replace the EGR valve of the Ford Focus 1.6 TDCi. First, we open the hood of the car …
Where is the EGR valve located on the Ford Focus 1.6 TDCI?
Where is the EGR valve located on the Ford Focus 1.6 TDCI?
Ford Focus (2004-2011 / MK 2, Focus 2) In this video, you will see where the EGR valve is located on the Ford Focus 1.6 TDCI and how to proceed if you need to replace it. As shown, the val…
Removing the EGR Valve on the Ford Focus MK3 1.6 TDCI
Removing the EGR Valve on the Ford Focus MK3 1.6 TDCI
Ford Focus (2011-2018 / MK 3) In this guide, discover the steps to remove, clean, or replace the EGR valve on the third generation Ford Focus with a 1.6 TDCI engine. First, open t…

Other guides you may be interested in

How to Reset the Tyre Pressure Warning Light on a Kia Rio?

The tyre pressure warning light displayed on the instrument cluster of the Kia Rio can be reset by inflating the tyres until they reach the recommended pressure value: this value is indicated on the sticker affixed to the driver's door pillar. Once all tyres have been inflated to the recommended pressure, turn on the ignition to check that the light has disappeared: if it is still present, it may be necessary to drive for a few miles, allowing the sensors to work and thus turning off the light.

Watch the video!


by ScegliAuto

More videos