Do it yourself
Frequently asked questions about cars and motorcycles
  1. Car
  2. :
  3. Ford
  4. :
  5. Focus
  6. : Automobile valve replacement

Ford Focus - Video tutorial

Model: Ford Focus MK 1 - Years 1998-2004
Part: Valve
Operation: Automobile valve replacement

The following guide gives useful tips for replacing valves. The valve is a component subjected to very intense stresses, and even if they are little considered components, they are essential to replace. These valves are made to a universal standard which makes them compatible with caps and inflating tools. The valves must be cleaned thoroughly and then sprinkled with grease or lubricant. To disassemble it, it must be carefully cut at the base. Before starting the vehicle, the tire pressure must be checked to prevent the valves from being damaged.


Posted on 30 July 2023 by ScegliAuto

    Frequently Asked Questions

    • Focus 2011-2018 - What problems does the EGR valve of the Ford Focus 1.6 TDCi have? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos