Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replace the Headlight Bulb on a Ford Escape

Model: Ford Escape MK 3 - Years 2013-2019
Part: Headlight bulb

The car no longer provides adequate light, and you noticed that one of the front bulbs is not working and needs to be replaced as soon as possible. In this video, you will find step-by-step instructions for replacing the front headlight bulb on a Ford Escape without going to a repair shop. First, open the hood and position yourself on the side of the bulb that needs to be replaced. Remove the round silicone cap covering the bulb housing and reach in to access the connector of the faulty bulb. Gently turn counterclockwise to remove the bulb from the housing and pull it out along with the connector. Once removed, you can proceed to replace it with the new one, reposition it, and secure it by turning clockwise until it locks. Turn on the vehicle's ignition to check if it works and reinsert the silicone cap, and you will have completed the operation.

Updated on 14 June 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Headlight Bulb in a Ford Escape
How to Replace the Headlight Bulb in a Ford Escape
Ford Escape (2008-2012 / MK 2) To replace the headlight bulb in a Ford Escape, open the hood to access the back of the headlight corresponding to the bulb to be replaced. Remove th…
How to replace the headlight bulbs on the Ford Escape?
How to replace the headlight bulbs on the Ford Escape?
Ford Escape (2008-2012 / MK 2) In this video, you can see how to replace the headlight bulbs on the second-generation Ford Escape. This is a very simple and quick operation; you do…
Guide to Removing the Front Headlight of a Ford Escape
Guide to Removing the Front Headlight of a Ford Escape
Ford Escape (2013-2019 / MK 3) In this guide, discover the instructions that will allow you to remove and replace the front headlight of a Ford Escape. First, open the hood of the …

Other guides you may be interested in

How to Replace the Battery on a Honda Vision 110

To replace the battery on a Honda Vision 110, you need to remove the front fairing of the motorcycle, located directly under the front headlamp. To loosen this panel, unscrew the two screws found at its top, just below the handlebar. Once these screws are loosened, lever under the panel to detach it, gaining access to the battery underneath: this battery must be removed from its housing by unscrewing the fixing screws and disconnecting the power cables, replacing it with a new one.

Watch the video!


by ScegliAuto

More videos