Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Ford
    3. :
  3. Focus
    4. : Replacement mirror sternum rearview mirror

Ford Focus - Video tutorial

Model: Ford Focus MK 1 - Years 1998-2004
Part: Outside rearview mirror
Operation: Replacement mirror sternum rearview mirror

The mirror inside the external rearview mirror shell is fixed on the support which also allows its adjustment with interlocking plastic tabs: in case of breakage, it is therefore possible to replace only this element rather than the entire mirror. with the possibility of finding this spare part also in the after market. To be able to release the mirror, it is sufficient to rotate it in order to move the external edge outwards and then pull it to release it; then proceed backwards to install it, first inserting the tab from the inside and then hooking the one from the outside.


Posted on 10 August 2023 by ScegliAuto

    Frequently Asked Questions

    • Focus 1998-2004 - How much does the Ford Focus 2002 right rearview mirror cost? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos