Do it yourself
Frequently asked questions about cars and motorcycles

How to Replace the Driver's Side Wing Mirror on a Ford Focus

Model: Ford Focus MK 3 - Years 2011-2018
Part: Side mirror

This video shows how to remove and replace the driver's side wing mirror on a Ford Focus. First, remove the plastic cover plate corresponding to the wing mirror and extract the two clips holding it in place. At this point, you can unscrew the bolts, disconnect the connector, and pull out the old mirror. To fit a new wing mirror, pass the connector from the outside to the inside, clip the piece in place, and secure it with clips and bolts. Once done, connect the connector, check that everything works, and refit the plastic cover plate.

Updated on 4 April 2026 by ScegliAuto

Video tutorial

Related tutorials

Ford Focus (2004-2011 / MK 2, Focus 2) How to replace the side indicator located in the external mirror of a Ford Focus? Proceed as follows: using a lever with a plastic or rubber coating,…
Ford Focus (2004-2011 / MK 2, Focus 2) See how to replace the external mirror (right side) on a Ford Focus. Using a plastic-coated lever, pry between the perimeter of the mirror frame and …
Ford Focus (2004-2011 / MK 2, Focus 2) How to remove the external rear-view mirror (driver's side) of a Ford Focus: use a lever to remove the part of the internal covering of the mirror (t…

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos