Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the External Wing Mirror from a Ford Focus

Model: Ford Focus MK 2, Focus 2 - Years: 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011
Part: Side mirror

See other generations:
Video tutorial

Before you can start, open the front door of your Ford Focus and fully lower the window. Begin by disengaging and removing the cover located near the wing mirror, using a thin but sturdy plastic tool to lever it off. This will expose the internal cover of the wing mirror bolts, which you will need to remove by unscrewing the relevant screws and disconnecting the electrical connector.

Once you have also removed the internal cover, you will reach the bolts that secure the wing mirror, which must also be unscrewed and removed. After completing this step, connect the wing mirror plug, then extract the wing mirror itself, and you will have finished the removal.


Updated on 7 April 2026 by ScegliAuto


Related tutorials

How to replace the external rearview mirror of the Ford Focus
How to replace the external rearview mirror of the Ford Focus
Ford Focus (2011-2018 / MK 3) Today's instructions will show us how to disassemble and replace the external rearview mirror of the Ford Focus. First, we open the front door of the…
How to Replace the External Mirror Fuses on a Ford Focus?
How to Replace the External Mirror Fuses on a Ford Focus?
Ford Focus (2011-2018 / MK 3) To replace the external mirror fuses on a Ford Focus, press the designated button on the driver's door to unlock the bonnet. Once opened, remove the …
How to Replace the External Wing Mirror on a Ford Focus
How to Replace the External Wing Mirror on a Ford Focus
Ford Focus (2004-2011 / MK 2, Focus 2) Before you can start, open the front door of your Ford Focus. Begin by lowering the window, then unclip and remove the covers near the wing mirror. N…

How to Reset the Tyre Light on a Toyota Aygo?

To reset the tyre light on a Toyota Aygo, start by locating the reset button, which is found in the glove compartment of the front passenger side. Turn on the car and ensure that the tyres are at the correct pressure. Then, press and hold the reset button for a few seconds until the tyre light either flashes or turns off, depending on the model. Release the button and wait for the reset procedure to complete. Restart your Toyota Aygo and check if the tyre light has turned off, indicating that the reset was successful.

Watch the video!


by ScegliAuto

More videos