Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Radio from a Ford Kuga

Model: Ford Kuga MK 2, C520 - Years: 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019
Part: Car stereo

See other generations:
This video is currently unavailable

In this video tutorial, you can see how to remove the radio from a Ford Kuga by following simple steps. First, get into the passenger side of your vehicle and start by removing the gear knob and the respective gear cover.

Next, detach the panel located below the gearbox and, using a T20 Torx key, unscrew the screws found under the panel you have removed. Now, disconnect the plastic cover and the respective electrical cables connected to it. Then, remove the screws that secure the radio in place and disconnect the radio's electrical cables.


Updated on 18 June 2026 by ScegliAuto


Related tutorials

Removing the Radio on Ford Kuga
Removing the Radio on Ford Kuga
Ford Kuga (2008-2012 / MK 1, C394) Replacing the radio on a Ford Kuga? Here’s how to remove the radio using the handy removal keys. Insert the keys into the slots on the sides of the p…
How to Unlock the Radio of the Ford Kuga
How to Unlock the Radio of the Ford Kuga
Ford Kuga (2008-2012 / MK 1, C394) Today, we will go through the main instructions to unlock the radio of the Ford Kuga using the code, in simple steps. First, get inside the vehicle a…
How to Remove the Radio from a Ford Kuga
How to Remove the Radio from a Ford Kuga
Ford Kuga (2008-2012 / MK 1, C394) To remove the radio from the interior of your first-generation Ford Kuga (2008-2012) independently, follow these simple steps. First, enter the vehic…

How to Replace the Glow Plugs in the Fiat Ducato 2.3 Multijet?

Glow plugs, as the name suggests, raise the temperature of the engine in diesel vehicles to allow for easier starting. The manufacturer, in this case, Fiat for the Ducato 2.3 Multijet, specifies how often they should be replaced, and a warning light will illuminate when it's time. This work is carried out under the bonnet. First, remove the upper engine cover, then lift the coil and, using a socket wrench of the appropriate size, unscrew the glow plug to remove it from the base, followed by installing the new one.

Watch the video!


by ScegliAuto

More videos