Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Ford
    3. :
  3. Focus
    4. : How to change the steering wheel on the Ford Focus

Ford Focus - Video tutorial

Model: Ford Focus MK 3 - Years 2011-2018
Part: Steering wheel
Operation: How to change the steering wheel on the Ford Focus

Let's see in this short and simple guide the instructions that will allow us to disassemble and replace the steering wheel of the Ford Focus. First we get on board the car and start removing the plastic bulkhead that we find behind the steering wheel; then we push on the two holes that we find on the back to remove the airbag, disconnecting the electrical connector, as shown in the video. At this point, unscrew the central bolt of the steering wheel to remove it, disconnecting the electrical connectors of the steering wheel controls; let's then reassemble the new steering wheel, following the video tutorial until the end!


Posted on 22 December 2022 by ScegliAuto

    Frequently Asked Questions

    • Focus 2004-2011 - What problems could the power steering of the Ford Focus 2 present? Read Answer
    • Focus 2004-2011 - What can cause a power steering failure in a 2006 Ford Focus? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos