Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Ignition Barrel on a Ford Fiesta

Model: Ford Fiesta Fiesta 6, MK 6, MK VI - Years 2008-2017

Here are the instructions that will allow you to remove and replace the ignition barrel on a Ford Fiesta. First, get into the vehicle and start by removing the plastic cover around the steering wheel to access the ignition barrel; then disconnect the two electrical connectors from the ignition switch to remove it later, as shown in the video. At this point, install the new ignition barrel, replacing the key accordingly and programming it, following the video tutorial to the end!

Updated on 10 July 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Left Front Door Handle on a Ford Fiesta
How to Replace the Left Front Door Handle on a Ford Fiesta
Ford Fiesta (2008-2017 / Fiesta 6, MK 6, MK VI) How do you replace the external handle on a Fiesta? Open the door and see how to disassemble it. Undo the screw located on the side of the door (as s…
How do you replace the door lock of the Ford Fiesta?
How do you replace the door lock of the Ford Fiesta?
Ford Fiesta (2002-2008 / Fiesta 5, MK 5, MK V) In order to replace the door lock of the Ford Fiesta, you need to loosen the screw located on the side of the door where the lock is. Once this screw…
How do you deactivate the alarm system in the Ford Fiesta 1.4 TDCi?
How do you deactivate the alarm system in the Ford Fiesta 1.4 TDCi?
Ford Fiesta (2002-2008 / Fiesta 5, MK 5, MK V) The immobilizer anti-theft system of the Ford Fiesta can be compared to many other Ford cars in terms of the possibility of deactivating it, and in t…

Other guides you may be interested in

How to Replace the Battery on a Honda Vision 110

To replace the battery on a Honda Vision 110, you need to remove the front fairing of the motorcycle, located directly under the front headlamp. To loosen this panel, unscrew the two screws found at its top, just below the handlebar. Once these screws are loosened, lever under the panel to detach it, gaining access to the battery underneath: this battery must be removed from its housing by unscrewing the fixing screws and disconnecting the power cables, replacing it with a new one.

Watch the video!


by ScegliAuto

More videos