Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Ford
    3. :
  3. Kuga
    4. : How to reset the Ford Kuga service

Ford Kuga - Video tutorial

Model: Ford Kuga MK 2, C520 - Years 2012-2019
Part: Instrument cluster
Operation: How to reset the Ford Kuga service

In today's video we see how to proceed to reset the service light, in the second series of Ford Kuga. First of all, remember to carry out the maintenance indicated in the car's on-board manual. Once this is done we can proceed. We keep the brake and accelerator pedals pressed and at the same time we turn on our car; after a few seconds we will see that the countdown will begin in the on-board computer until confirmation that the operation has been performed correctly. We can then finish the operation and continue driving normally or switch off the car.


Posted on 16 May 2023 by ScegliAuto

    Frequently Asked Questions

    • Kuga 2020-2027 - What does the check engine light on Ford Kuga mean? Read Answer
    • Kuga 2020-2027 - What to do when the engine malfunction light comes on on Ford Kuga? Read Answer
    • Kuga 2020-2027 - What are the warning lights on Ford Kuga? Read Answer
    • Kuga 2012-2019 - How do you reset the Ford Kuga oil light? Read Answer
    • Kuga 2008-2012 - What does the Ford Kuga oil warning light mean? Read Answer
    • Kuga 2020-2027 - What is the meaning of the warning lights on the Ford Kuga? Read Answer
    • Kuga 2012-2019 - What problems have been encountered with the fuel gauge on Ford Kuga? Read Answer
    • Kuga 2012-2019 - What does the yellow engine light on the Ford Kuga 2 mean? Read Answer
    • Kuga 2012-2019 - What does the engine failure warning light on on Ford Kuga mean? Read Answer
    • Kuga 2012-2019 - What are the possible causes of the engine failure warning light on Ford Kuga? Read Answer

How do you adjust the clutch cable on the Kia Picanto?

To be able to adjust the clutch cable of the Kia Picanto you need to open the hood so that you have access to the components inside the engine compartment: in order to reach the cable you will need to remove some components on the right side, such as the battery and the air filter. Below them you will find the clutch cable, which will have to be adjusted by screwing or loosening the bolt placed at the end of the cable. This will make the pedal harder or softer; after the adjustment, it will be possible to assemble all the components by closing the hood.

Watch the video!


by ScegliAuto

More videos