Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Service Light on a Ford Kuga

Model: Ford Kuga MK 2, C520 - Years: 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019
Part: Service warning light

See other generations:
Video tutorial

To reset the service light on a Ford Kuga, ensure that the necessary servicing operations have been carried out at a garage for the vehicle's circulation. To perform the reset, press the brake and accelerator pedals while turning on the ignition.

Wait a few seconds for the light to reset, then release both pedals and switch off the vehicle. Restart the vehicle to complete the service configuration.

If the light does not reset, you can repeat the reset procedure.


Updated on 21 October 2026 by ScegliAuto


Related tutorials

How to reset the service light on the Ford Kuga
How to reset the service light on the Ford Kuga
Ford Kuga (2012-2019 / MK 2, C520) .. Today we will explain how to reset the service light on a Ford Kuga vehicle. We remind you that before performing the steps.. …
How to reset the service light on the Ford Kuga
How to reset the service light on the Ford Kuga
Ford Kuga (2008-2012 / MK 1, C394) The service light on a Ford Kuga MK1 model produced from 2008 to 2013 activates when it is necessary to perform maintenance on the vehicle. After com…
How to Reset the Service Light on a Ford Kuga
How to Reset the Service Light on a Ford Kuga
Ford Kuga (2012-2019 / MK 2, C520) Today, learn how to reset the service light related to the service interval on the Ford Kuga. To perform the reset, turn on the ignition and immediat…

How to Remove the Toll Tag Holder from the Car Windscreen

The toll tag holder is usually attached to the car windscreen to ensure that the toll tag functions immediately when passing through barriers. However, if you decide to remove the holder, you should follow this procedure: - Insert the toll tag into the holder; - Pull the holder inwards to detach it from the windscreen; you can use a glass scraper or a stiff plastic card to assist you; After removing the holder, it is essential to remove the adhesive from the windscreen. To remove the adhesive, we recommend using a solvent-based spray that will remove the glue without clouding the area.

Watch the video!


by ScegliAuto

More videos