Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Oil Service Light on the Ford Kuga?

Model: Ford Kuga C520, MK 2 - Years 2012-2019
Part: Service warning light

To reset the Oil Service light on the Ford Kuga, turn on the ignition and wait for all reset messages to appear on the display. Once all messages are shown, proceed to reset the light: press the brake and accelerator pedals fully three times and hold them down. A message will appear on the display indicating that the oil reset is in progress. After a few seconds, the light will reset, and you can verify this by turning the ignition off and back on again.

Updated on 16 July 2026 by ScegliAuto

Video tutorial

Related tutorials

How to reset the Oil Service light on a Ford Kuga?
How to reset the Oil Service light on a Ford Kuga?
Ford Kuga (2012-2019 / C520, MK 2) To reset the Oil Service light on a Ford Kuga, turn on the instrument cluster to check that the light is illuminated. Then, press and hold the accele…
How to reset the Oil Service light on the Ford Kuga?
How to reset the Oil Service light on the Ford Kuga?
Ford Kuga (2012-2019 / C520, MK 2) To reset the Oil Service light on the Ford Kuga, turn on the instrument cluster and wait for all messages indicating the resets to appear on the disp…
How to Reset the Oil Service Light on a Ford Kuga?
How to Reset the Oil Service Light on a Ford Kuga?
Ford Kuga (2012-2019 / C520, MK 2) To reset the Oil Service light on the Ford Kuga, turn on the instrument cluster and wait for all messages indicating resets to be displayed. Once the…

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos