Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to reset the Oil Service light on the Ford Kuga?

Model: Ford Kuga C520, MK 2 - Years 2012-2019
Part: Service warning light

To reset the Oil Service light on the Ford Kuga, turn on the instrument cluster and wait for all messages indicating the resets to appear on the display. Once the messages have finished, you can proceed with the reset: to do this, press the brake and accelerator pedals fully three times and hold them down. A message will appear on the display indicating that the oil reset is in progress. After a few seconds, the reset will occur, and you can confirm it by turning the instrument cluster off and on again.

Updated on 28 April 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Reset the Oil Change Light in the Ford Kuga?
How to Reset the Oil Change Light in the Ford Kuga?
Ford Kuga (2020-2026 / MK 3) In this tutorial, see how to reset the oil service light in the Ford Kuga, a very simple and quick operation to perform only after changing the oil a…
How to Reset the Service Light on the Ford Kuga
How to Reset the Service Light on the Ford Kuga
Ford Kuga (2012-2019 / C520, MK 2) The procedure to manually reset the service light on your 2015 Ford Kuga is quite simple and will be described in the following mini guide. First, pr…
Reset the Service Light on Ford Kuga 2020
Reset the Service Light on Ford Kuga 2020
Ford Kuga (2020-2026 / MK 3) Resetting the service light on the new Ford Kuga is a straightforward task that you can do yourself at home. First, ensure that you have changed the …

Other guides you may be interested in

How to Bleed the Clutch on a Renault Clio?

To bleed the clutch on a Renault Clio, open the bonnet to access the components located in the engine bay: here, you will need to undo the screws that secure the battery in its housing, the intake manifold, and the coolant reservoir. This will allow you to locate the pipe through which the brake fluid flows: by inserting the other end of the pipe into a container, you can press the clutch pedal to expel all the fluid until it fills the container.

Watch the video!


by ScegliAuto

More videos