Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Interior Handle on a Ford Expedition?

Model: Ford Expedition U324 - Years: 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017
Part: Handle

See other generations:
Video tutorial

In this tutorial, you will see how to replace the interior handle on a Ford Expedition, a very simple task. First, open the door you will be working on. Then, using a flathead screwdriver, pry open the small cover located inside the handle.

Next, remove the exposed bolt and detach the trim by leveraging it with a plastic spatula. Once this is done, using the screwdriver again, detach the handle's pin from the frame, disconnect the lock cable, and install the replacement by following the reverse procedure.


Updated on 23 July 2026 by ScegliAuto


Related tutorials

How to replace the rear door lock of the Ford Expedition
How to replace the rear door lock of the Ford Expedition
Ford Expedition (2003-2006 / U222) In this guide we will see the instructions that will allow us to disassemble and replace the lock of the rear door of the Ford Expedition, in simple …
What to Do If the Tailgate is Stuck on the Ford Expedition?
What to Do If the Tailgate is Stuck on the Ford Expedition?
Ford Expedition (2003-2006 / U222) On the Ford Expedition, the trunk tailgate may get stuck due to a malfunction in the lock. In this case, perform the emergency opening by following t…
Where to Find the Fuse Box of the Ford Expedition
Where to Find the Fuse Box of the Ford Expedition
Ford Expedition (2003-2006 / U222) If some electrical components in your Ford Expedition are experiencing issues and you want to find their respective fuses, just read this guide and f…

How to enter the radio code in the Opel Zafira?

In the Opel Zafira, it may happen that the radio locks and consequently requests the appropriate security code, especially after disconnecting or replacing the battery. The code can be found in the documents provided at purchase or through one of the various online recovery services. Once obtained, enter it by following the procedure shown in this tutorial. First, switch on the instrument panel, then press and hold both the "AS" button and the left knob for about 5 seconds. Next, enter the first digit by repeatedly pressing the "1" button, continue with the next 3 buttons, and save the setting by pressing the "AS" button again.

Watch the video!


by ScegliAuto

More videos