Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Ford
    3. :
  3. Fiesta
    4. : How to replace the bulb of the Ford Fiesta.

Ford Fiesta - Video tutorial

Model: Ford Fiesta MK VI, Fiesta 6, MK 6 - Years 2008-2017
Part: Headlight bulb
Operation: How to replace the bulb of the Ford Fiesta.

This video shows how to replace the front headlights of a Ford Fiesta. To replace them, you will need a Torx 20 and a flathead screwdriver. First, open the hood and insert the block. Then, using the flathead screwdriver, unscrew the two locking screws on the sides of the headlight. Once removed, remove the plastic clip, disconnect the connector, and remove the headlight. Once the headlight is removed, remove the bulb clip with the Torx 20 key, then remove and replace the bulb. Once replaced, reattach the bulb clip, reconnect the connector, reinsert the headlight, and reattach the plastic clip and locking screws that were previously removed.


Posted on 11 May 2023 by ScegliAuto



How to replace the arrow bulb on the Ford Fiesta mirror?
Ford Fiesta (2017-2023 / MK VII, Fiesta 7, MK 7) In order to replace the indicator light bulb on the Ford Fiesta mirror, you need to use an object that acts as a lever to be able to extract the mirr
How do you replace the interior light bulb on a Ford Fiesta?
Ford Fiesta (2002-2008 / MK V, Fiesta 5, MK 5) In order to replace the interior light bulb of the Ford Fiesta, you need to pry with an object, so that the ceiling light positioned immediately behi
How to replace the front headlight bulb in a Ford Fiesta.
Ford Fiesta (2008-2017 / MK VI, Fiesta 6, MK 6) In this video tutorial, we can see how it is possible to replace the front headlight bulb in a Ford Fiesta, following some simple steps that will all

Fiat Ducato 2.8 JTD gearbox oil replacement

Let's see in this guide the main steps to be able to change the transmission oil of the second series Fiat Ducato, with 2.8 JTD engine. First of all we lift the car and go to locate the gear oil vent bolt, which we find near the transmission; we use a hex wrench to unscrew it, letting it drain the old oil in a container for about ten minutes. At this point we open the bonnet and remove the air intake sleeve, so as to be able to access the gearbox oil filling hole; then we fill up to the maximum level!

Watch the video!


by ScegliAuto

More videos