Do it yourself
Frequently asked questions about cars and motorcycles

Replacing the Headlight Bulbs on a Ford Fiesta

Model: Ford Fiesta MK 7, MK VII, Fiesta 7 - Years: 2017, 2018, 2019, 2020, 2021, 2022, 2023
Part: Headlight

See other generations:
Video tutorial

If one or more bulbs in the front headlight of the Ford Fiesta have blown, replace them as soon as possible. Open the bonnet and unscrew the three screws securing the headlight, which contains the bulbs to be replaced, carefully detach it from its housing, and disconnect the electrical connector.

You can then place the headlight on a flat surface to work safely. The three bulb housings are protected by rubber covers, which you must remove to access the electrical connections; once removed, you can take out the blown bulb and replace it with a new one. Retrace your steps, ensuring to place the headlight back in its correct position, and before closing the bonnet, check its operation.


Updated on 21 August 2026 by ScegliAuto


Related tutorials

Ford Fiesta (2002-2008 / MK V, MK 5, Fiesta 5) In this brief guide, we will see the instructions to remove and replace the front headlight and its bulbs on a Ford Fiesta. First, open the bonnet of…
Ford Fiesta (2008-2017 / Fiesta 6, MK VI, MK 6) In today's video, you will learn how to remove and replace the position bulb of the front headlamp on a Ford Fiesta from 2008 to 2017. First, open th…
Ford Fiesta (2008-2017 / Fiesta 6, MK VI, MK 6) Open the bonnet by pulling the lever located at the bottom right of the dashboard and secure it with the prop rod. Unscrew the bolts located above th…

Other guides you may be interested in

How to Replace the Glow Plugs in the Fiat Ducato 2.3 Multijet?

Glow plugs, as the name suggests, raise the temperature of the engine in diesel vehicles to allow for easier starting. The manufacturer, in this case, Fiat for the Ducato 2.3 Multijet, specifies how often they should be replaced, and a warning light will illuminate when it's time. This work is carried out under the bonnet. First, remove the upper engine cover, then lift the coil and, using a socket wrench of the appropriate size, unscrew the glow plug to remove it from the base, followed by installing the new one.

Watch the video!


by ScegliAuto

More videos