Do it yourself
| ||||
|
Ford Transit - Video tutorial
Model: Ford Transit
MK 8
- Years 2014-2023 In this video, we can see how to perform the reset of the Transit Custom: first, we need to make sure that the trunk, hood, and doors are closed properly, then we turn on the instrument panel. Now, press down the brake pedal completely and hold it for 15 seconds. A message will appear on the display or the service light will flash (this will depend on the version). Now, release the brake pedal and turn off the panel. Wait for about two minutes, after which we can turn on the panel again and check if the message is turned off or the light is reset.
Posted on 17 November 2023 by ScegliAuto
Other guides that may interest you |
Frequently Asked QuestionsHow do you adjust the clutch cable on the Kia Picanto?To be able to adjust the clutch cable of the Kia Picanto you need to open the hood so that you have access to the components inside the engine compartment: in order to reach the cable you will need to remove some components on the right side, such as the battery and the air filter. Below them you will find the clutch cable, which will have to be adjusted by screwing or loosening the bolt placed at the end of the cable. This will make the pedal harder or softer; after the adjustment, it will be possible to assemble all the components by closing the hood. by ScegliAuto More videos
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.009
(c) ScegliAuto 2024 - info@scegliauto.com - Privacy Policy VAT number: IT01247470535 |