Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Front Seats in a Ford F-150 Pickup?

Model: Ford F-150 MK 13 - Years 2015-2020
Part: Seat

In this tutorial, you will see how to remove the front seats in a Ford F-150 pickup, a very simple and quick operation. First, open the hood and disconnect the negative terminal of the battery. Then, move to the back of the seat in question, slide it forward, and remove the rear mounting bolts with a 15mm socket wrench. Next, disengage the side plastic cover, remove the additional bolt indicated with a T47 Torx wrench, and separate the seatbelt. At this point, remove the front bolts, disconnect the large lower connector, and extract the seat from the cabin.

Updated on 7 September 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Heater Core in a Ford F-150 Pickup?
How to Replace the Heater Core in a Ford F-150 Pickup?
Ford F-150 (1997-2004 / MK 10) .. see how to replace the heater core in a Ford F-150 pickup, a task that requires good manual skills. First, remove both covers from the front pillars,.. …
How to Remove the Door Panel on a Ford F-150 Pickup?
How to Remove the Door Panel on a Ford F-150 Pickup?
Ford F-150 (2004-2008 / MK 11) .. Removing the door panel on a Ford F-150 pickup, as shown in this tutorial, is an extremely simple and quick operation. For this, you will.. …
How to replace the alternator in a Ford F-150 pickup?
How to replace the alternator in a Ford F-150 pickup?
Ford F-150 (2009-2014 / MK 12) .. see how to replace the alternator in a Ford F-150 pickup, a very simple and quick operation. First, make sure the engine is completely cool, then open.. …

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos