Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Resetting the BMS of the Ford F150

Model: Ford F-150 MK 14 - Years 2021-2026
Part: Battery

In this video, we see how, after replacing the battery of the Ford F150, it is good practice to reset the BMS system, which is responsible for monitoring the battery functions and warning us if there are any issues. To do this, we sit in the driver's seat, press the start button to turn on the instrument panel, use the lever to the left of the steering wheel to activate the high beams five times, and then press the brake pedal three times. After completing these operations, we will see the red battery light, to the right of the tachometer, flash three times, and at the end of the flashing the operation will be completed.

Posted on 1 October 2024 by ScegliAuto

Video tutorial

Related tutorials

Resetting the Ford F150 MK10 Service light
Resetting the Ford F150 MK10 Service light
Ford F-150 (1997-2004 / MK 10) As we approach the scheduled mileage to perform the engine oil and filter change on the Ford F150, a warning light appears on the dashboard to remind…
What is the purpose of and how to reset the BMS of Ford?
What is the purpose of and how to reset the BMS of Ford?
Ford F-150 (2021-2026 / MK 14) The BMS of a Ford vehicle is the Battery Management System: an intelligent electronic system designed to monitor and control the vehicle's battery, p…
How to reset the "Service" light on a Ford F150?
How to reset the "Service" light on a Ford F150?
Ford F-150 (2015-2020 / MK 13) To reset the "Service" light on a Ford F150, turn on the ignition without starting the engine. Use the buttons on the steering wheel to access the on…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos