Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removing the Instrument Cluster from a Ford F-150

Model: Ford F-150 MK 12 - Years 2009-2014
Part: Instrument cluster

This guide provides instructions to remove and replace the instrument cluster in a Ford F-150 in simple and quick steps. First, get inside the vehicle and start by unscrewing the screws located at the bottom of the instrument cluster cover; then, remove the plastic cover in front of the cluster and unscrew any additional screws underneath, as shown in the video. At this point, extract the instrument cluster by disconnecting the electrical connectors at the back; then, apply the reverse procedure for reassembly!

Updated on 11 May 2026 by ScegliAuto

Video tutorial

Related tutorials

Removing the Stock Radio from a Ford F-150
Removing the Stock Radio from a Ford F-150
Ford F-150 (2004-2008 / MK 11) In today's video tutorial, you will see how to remove the stock radio from a Ford F-150 in simple and quick steps. First, get in the vehicle and star…
How to Replace the Instrument Cluster on a Ford F-150
How to Replace the Instrument Cluster on a Ford F-150
Ford F-150 (2004-2008 / MK 11) In this video tutorial, you will learn how to remove and replace the instrument cluster on a Ford F-150 by following the instructions below. First, g…
Where is the OBD2 port located on the Ford F 150?
Where is the OBD2 port located on the Ford F 150?
Ford F-150 (2015-2020 / MK 13) To be able to find the OBD2 port inside the cabin of your Ford F 150, you do not need to remove any components. In the following guide, we will help …

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos