Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

What is the purpose of and how to reset the BMS of Ford?

Model: Ford F-150 MK 14 - Years 2021-2026
Part: Onboard computer

The BMS of a Ford vehicle is the Battery Management System: an intelligent electronic system designed to monitor and control the vehicle's battery, particularly in newer models that include technologies such as auto start & stop and more sophisticated charging systems. Normally there is a sensor connected to the negative terminal of the battery, through which all services that are carried out with the BMS are performed; older models have the sensor wrapped around the cable. To reset it, there are two ways: the first is to turn the high beams on and off five times, then press the brake pedal all the way down three times and turn off and on the ignition. Or we can leave everything still and wait a few seconds without turning off the ignition, then look in the corner to see if the light has turned off.

Posted on 6 November 2025 by ScegliAuto

Video tutorial

Related tutorials

How do you reset the BMS light on Ford vehicles?
How do you reset the BMS light on Ford vehicles?
Ford F-150 (2021-2026 / MK 14) To reset the BMS light on Ford vehicles, you need to turn on the instrument panel by inserting the ignition key into the corresponding slot: then you…
Resetting the BMS of the Ford F150
Resetting the BMS of the Ford F150
Ford F-150 (2021-2026 / MK 14) In this video, we see how, after replacing the battery of the Ford F150, it is good practice to reset the BMS system, which is responsible for monito…
How to Reset the Ford F-150 Radio?
How to Reset the Ford F-150 Radio?
Ford F-150 (2015-2020 / MK 13) To reset the Ford F-150 radio, turn the ignition key to the 'On' position. Once the dashboard lights up, press and hold the radio buttons to power it…

How to Bleed the Clutch on a Renault Clio?

To bleed the clutch on a Renault Clio, open the bonnet to access the components located in the engine bay: here, you will need to undo the screws that secure the battery in its housing, the intake manifold, and the coolant reservoir. This will allow you to locate the pipe through which the brake fluid flows: by inserting the other end of the pipe into a container, you can press the clutch pedal to expel all the fluid until it fills the container.

Watch the video!


by ScegliAuto

More videos