Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Ford
    3. :
  3. Focus
    4. : How to remove the Ford Focus interior rearview mirror

Ford Focus - Video tutorial

Model: Ford Focus MK 1 - Years 1998-2004
Part: Interior rearview mirror
Operation: How to remove the Ford Focus interior rearview mirror

Do you want to replace the rearview mirror or simply clean it without the fear of breaking it? In this video you will be shown how it can be disassembled in the easiest, most practical and fastest way, without damaging anything. The first thing you need to do is put your finger behind the mirror hook, which is attached to the windshield while starting to move it with the other hand. You will see that you will be able to take it off with little effort. Once the mirror is removed, you will notice the hook attached to the windshield. The upper part of the mirror, the one that attaches to the windshield, is provided with rails, which mate with the hook attached to the windshield so that installation is also easy.


Posted on 21 September 2023 by ScegliAuto

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos