Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to remove the front seats in the Ford Tourneo Custom van?

Model: Ford Tourneo MK 2 - Years 2013-2024
Part: Seat

In this tutorial, we can see how to disassemble the front seats in the Ford Tourneo Custom van, a very simple and quick operation. Before proceeding, disconnect the negative terminal of the battery to prevent accidental activation of the airbags. Start by going to the side where you will be working, then move the seat all the way back, locate the front bolts of the brackets and unscrew them using a Torx T40 key. Then move the seat forward, unscrew the additional bolts, and continue by removing the safety belt attachment. At this point, all that's left is to disconnect the large lower connector and remove the seat from the cabin.

Posted on 7 May 2024 by ScegliAuto

Video tutorial

Related tutorials

Removing and Configuring the Rear Seats on the Ford Tourneo Custom
Removing and Configuring the Rear Seats on the Ford Tourneo Custom
Ford Tourneo (2013-2024 / MK 2) In this short and simple guide, see how to configure and remove the rear seats on the Ford Tourneo Custom, following the instructions below. First, o…
How to Remove and Configure the Rear Seats of the Ford Tourneo Custom
How to Remove and Configure the Rear Seats of the Ford Tourneo Custom
Ford Tourneo (2013-2024 / MK 2) Today's tutorial will show you how to remove and configure the rear seats of the Ford Tourneo Custom, following the instructions below. First, open t…
How to Customize the Seat Positions in a Ford Tourneo Custom
How to Customize the Seat Positions in a Ford Tourneo Custom
Ford Tourneo (2013-2024 / MK 2) Today's guide will show you useful instructions to customize the seating configuration of the Ford Tourneo Custom. The configuration of the rear seat…

Other guides you may be interested in

How to Open the Bonnet of a Renault Megane if the Lever is Broken?

If the lever that unlocks the bonnet of the Renault Megane is broken or not functioning, there is an emergency procedure to unlock the mechanism: remove the right front grille located at the top of the bumper. Once the grille is removed, you can locate the actuator mechanism: by pulling the spring in this position, you can unlock the actuator, allowing you to lift the bonnet and access the components located inside the engine compartment. You can then close the bonnet simply by lowering it.

Watch the video!


by ScegliAuto

More videos