Do it yourself
Frequently asked questions about cars and motorcycles

Replacing the Front Brake Pads on Gasgas EC300

Model: Gasgas Ec300
Part: Brake pads

Video tutorial

Using a 5 mm Allen key, loosen the lower bolt of the brake caliper, then unscrew the two main bolts that secure it to the brake disc using a socket wrench. Now, using a crowbar, pry on the pistons holding the pads, widening the slots and allowing them to come out. This will also assist in the next step, which is inserting the new pads, which will obviously be much thicker than the ones removed.

Completely unscrew the 5 mm bolt that acts as a pivot for the pads. Once the new pads are fitted, proceed in reverse to reattach the caliper to the disc.


Updated on 12 April 2026 by ScegliAuto


Related tutorials

Ec300 Hello! Today, you will learn how to replace the rear brake pads on a Gasgas EC300. First, place the bike on a stand and remove the rear wheel by unsc…
Ec300 To replace the fork bearings on a Gasgas EC 300, first remove the front wheel by taking off the axle and securing bolts. Next, detach the brake calip…
Ec300 Before you start, position your Gas Gas EC 300 vertically for easier access. Begin by unscrewing and removing the pins that secure the brake pads to …

How to Replace the Fuel Filter on the MV Agusta Brutale 920?

To replace the fuel filter on the MV Agusta Brutale 920, loosen the screws that secure the fuel tank to its housing: once the screws securing the tank, hoses, and connectors have been loosened, you can completely remove the tank and then locate the fuel pump underneath. At this point, loosen the screws that secure the pump, remove it, and locate the fuel filter attached to it: this will allow you to replace it by inserting the new replacement part.

Watch the video!


by ScegliAuto

More videos