Do it yourself
Frequently asked questions about cars and motorcycles

How to Replace the Fork Bearings on a Gasgas EC300?

Model: Gasgas Ec300
Part: Bearing

Video tutorial

To replace the fork bearings on a Gasgas EC 300, first remove the front wheel by taking off the axle and securing bolts. Next, detach the brake caliper from the brake disc and then remove the two front forks by simply dislodging them as shown in the video.

Once the two forks are removed from the rest of the bike, you can extract all the various bearings: some tools may be needed to assist in their removal. Once all the bearings have been replaced, reassemble the forks and all other previously removed parts.


Updated on 21 April 2026 by ScegliAuto


Related tutorials

Ec300 Hello! Today, you will learn how to replace the rear brake pads on a Gasgas EC300. First, place the bike on a stand and remove the rear wheel by unsc…
Ec300 Warm the engine for several minutes to make the oil inside warmer and less viscous. This will aid the subsequent draining of the lubricant. For the s…
Ec300 In this brief guide, you will find the main instructions to help you bleed and top up the coolant in the Gasgas Ec 300 enduro bike. First, place your…

How to Replace the Fuel Filter on the MV Agusta Brutale 920?

To replace the fuel filter on the MV Agusta Brutale 920, loosen the screws that secure the fuel tank to its housing: once the screws securing the tank, hoses, and connectors have been loosened, you can completely remove the tank and then locate the fuel pump underneath. At this point, loosen the screws that secure the pump, remove it, and locate the fuel filter attached to it: this will allow you to replace it by inserting the new replacement part.

Watch the video!


by ScegliAuto

More videos