Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Model: Gasgas Ec300
Part: Engine oil

Warm the engine for several minutes to make the oil inside warmer and less viscous. This will aid the subsequent draining of the lubricant. For the same reason, first unscrew the upper hole from which you will add the new engine oil, and only then the lower drain hole: this will prevent a vacuum from forming and will again facilitate the outflow due to air circulation. Unscrew the plate that protects the drain hole to access it. Collect the used oil in a container, tighten the lower hole, and fill with 20W-50 oil from the fill hole, as shown in the video.

Updated on 3 April 2026 by ScegliAuto

Video tutorial

Related tutorials

Replacing Rear Brake Pads on Gasgas EC300
Replacing Rear Brake Pads on Gasgas EC300
Ec300 Hello! Today, you will learn how to replace the rear brake pads on a Gasgas EC300. First, place the bike on a stand and remove the rear wheel by unsc…
How to Replace the Fork Bearings on a Gasgas EC300?
How to Replace the Fork Bearings on a Gasgas EC300?
Ec300 To replace the fork bearings on a Gasgas EC 300, first remove the front wheel by taking off the axle and securing bolts. Next, detach the brake calip…
Replacing the Front Brake Pads on Gasgas EC300
Replacing the Front Brake Pads on Gasgas EC300
Ec300 Using a 5 mm Allen key, loosen the lower bolt of the brake caliper, then unscrew the two main bolts that secure it to the brake disc using a socket w…

How to Remove the Engine from the Piaggio Vespa GTS 250 - 300

In this guide, you will learn how to remove the engine block from the body of the Piaggio Vespa GTS 250 and GTS 300. First, place your scooter on the centre stand and begin by removing the exhaust silencer by unscrewing the bolts; then, unscrew the central bolt of the wheel hub and remove the entire wheel, as shown in the video. At this point, disconnect the suspension from the engine block by detaching the fuel lines and various wiring; then, remove the engine block, applying the reverse procedure for reassembly!

Watch the video!


by ScegliAuto

More videos