Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Motorcycles
    2. :
  2. Gasgas
    3. :
  3. Ec300
    4. : Replacement of rear brake pads on Gasgas EC300

Model: Gasgas Ec300
Part: Brake pads
Replacement of rear brake pads on Gasgas EC300

Bye! Today we will show you how to replace the rear brake pads on Gasgas EC300. First, put the motorcycle on a stand and remove the rear wheel by unscrewing the fixing bolts, then unscrew the 5 mm screw which is the fixing pin to the brake pads. By removing this pin, the two pads will come out, so you can clean it and insert the two new pads, which will obviously be much thicker than the worn ones. Screw the pin and refit the wheel. As you can see, this is a fairly simple operation although it requires some time, suitable for inexperienced maintenance technicians.


Posted on 18 March 2024 by ScegliAuto

How to replace the rear wheel on the Ktm Duke 390

Below we will illustrate the guide on how to disassemble and replace the rear wheel of the Ktm Duke 390, following the instructions below. First of all we put the stand on our motorbike and we go to raise the rear wheel from the ground; then we unscrew the central pin of the wheel, disconnecting the chain from the crown, as shown in the video. At this point we remove the wheel and replace the rear sprocket or the brake disc, unscrewing the fixing screws; eventually replace the rear tire and reassemble everything, following the video tutorial to the end.

Watch the video!


by ScegliAuto

More videos