Do it yourself
Frequently asked questions about cars and motorcycles

Model: Gasgas Ec300

Discover in this video how to disassemble and replace the crankshaft oil seal on the Gasgas EC 300 enduro bike, following the instructions below. First, remove the side casing by taking off the chain; then proceed to remove the crankshaft sprocket by unscrewing the fixing screws. At this point, use a sharp object to remove the crankshaft oil seal, replacing it with the new one; lubricate with a bit of oil and push with a soft material until it is fully seated, then reassemble everything!

Updated on 2 May 2026 by ScegliAuto

Video tutorial

Related tutorials

Ec300 In this brief guide, you will find the main instructions to help you bleed and top up the coolant in the Gasgas Ec 300 enduro bike. First, place your…
Ec300 To replace the fork bearings on a Gasgas EC 300, first remove the front wheel by taking off the axle and securing bolts. Next, detach the brake calip…
Ec300 Warm the engine for several minutes to make the oil inside warmer and less viscous. This will aid the subsequent draining of the lubricant. For the s…

How to Replace the Clutch on a Triumph Speed Triple?

To replace the clutch on a Triumph Speed Triple, loosen the bolts securing the covers of the three casings located on the right side of the bike, namely the starter motor, the engine, and then the clutch. Once these covers are removed, you can access the bolts securing the clutch, unscrew them, and slide the clutch plates out of their housing. This will allow you to insert the new plates into their place, securing everything with the appropriate bolts; finally, reinstall all the casings.

Watch the video!


by ScegliAuto

More videos