Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Model: Gasgas Ec 300
Part: Valve

To adjust the valves on the GasGas EC 300, loosen the bolts securing the cover of the casing on the right side of the bike, next to the clutch. Once the casing is removed, unscrew the screws securing the plastic cover underneath, allowing access to the valves. These can be adjusted following the instructions in the motorcycle's user and maintenance manual using a feeler gauge. Once correctly adjusted, close them with the casing and the plastic cover.

Updated on 13 June 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Adjust the Valves on a GasGas EC 300
How to Adjust the Valves on a GasGas EC 300
Ec 300 To adjust the valves on a GasGas EC 300, loosen all the bolts securing the cover on the right side of the bike, which contains the valve mechanism. O…
How do you replace the exhaust valve of the GasGas EC 300?
How do you replace the exhaust valve of the GasGas EC 300?
Ec 300 In order to replace the exhaust valve of the GasGas EC 300, you need to loosen the screws that secure the valve cover to the top of the engine cylind…
How to Dismantle the Engine of the GasGas EC 300?
How to Dismantle the Engine of the GasGas EC 300?
Ec 300 To dismantle the engine of the GasGas EC 300, extract the engine block from its housing after loosening the bolts securing the respective supports. Y…

How to Reset the Oil Light on a Honda PCX 160

In this mini guide, discover the steps to manually reset the oil light on the central display of your Honda PCX 160. First, turn on the ignition with the key and press both the 'Sel' and 'Set' buttons located below it simultaneously. When the time starts to flash, hold 'Sel' until the oil indicator flashes, then press the 'Set' button once. To complete the reset, hold 'Sel' again until the operation is finished.

Watch the video!


by ScegliAuto

More videos