Do it yourself
| ||||
|
Model: Gasgas Gasgas 700
Today we will see how to perform the routine maintenance service on the Gasgas 700 enduro motorcycle, by replacing the engine oil and oil filter. First, we put the motorcycle on a stand and start by unscrewing the oil drain bolt located underneath the engine, letting it drain into a container for about ten minutes. Then, we unscrew the screws of the oil filter cover, removing and replacing the cartridge with a new one, as shown in the video. At this point, we unscrew the fill cap and top up with the correct type of new engine oil, making sure to check the level!
Posted on 14 September 2023 by ScegliAuto
|
How to replace the belt and variator on the Sym Jet14 124Let's find out in this guide how to disassemble and replace the drive belt and the variator on the Sym Jet14 125 scooter, following the instructions below. First of all, let's disassemble our clutch side carter, unscrewing all the side screws; then we go to remove the pulley and the fan, unscrewing the central nuts, as shown in the video. At this point we can remove the transmission belt and the variator, together with the rollers; we just have to clean the inside of the casing reassemble everything, following the video tutorial to the end! by ScegliAuto More videos
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.004
(c) ScegliAuto 2024 - info@scegliauto.com - Privacy Policy VAT number: IT01247470535 |