Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Exhaust of the GasGas SM 700?

Model: Gasgas Sm 700
Part: Exhaust muffler

Video tutorial

To replace the exhaust of the GasGas SM 700, loosen the screws that secure the seat to its housing: these screws are located on the rear mudguard, just behind the seat. Once loosened, proceed to loosen the screws that secure the left side panel of the bike, locating the exhaust underneath: the exhaust can be loosened by removing the screws that secure it to its supports and disconnecting the screws that join it to the exhaust pipe.

At this point, insert the new exhaust, ensuring everything functions correctly.


Updated on 30 September 2026 by ScegliAuto


Related tutorials

How to replace the exhaust on the GasGas SM 700?
How to replace the exhaust on the GasGas SM 700?
Sm 700 To replace the exhaust on the GasGas SM 700, loosen the screws securing the right side cover of the rear mudguard. Once this panel is completely remo…
How do you replace the exhaust pipe of the GasGas SM 700?
How do you replace the exhaust pipe of the GasGas SM 700?
Sm 700 The exhaust pipe installed on the GasGas SM 700 can be replaced by loosening the screws that secure the right side panel of the corresponding fender …
How do you replace the exhaust pipe of the GasGas SM 700?
How do you replace the exhaust pipe of the GasGas SM 700?
Sm 700 On board the GasGas SM 700, the procedure for replacing the exhaust can be carried out by loosening the screws that secure the right side panel of th…

How to Replace the Headlamp Bulb on a Harley Davidson Street Bob

Today, we will guide you on how to dismantle and replace the headlamp bulb on a Harley Davidson Street Bob. First, place your motorcycle on a stand and start by removing the metal frame of the headlamp by unscrewing the fixing screw. Then, remove the optical unit and disconnect the electrical connector of the bulb, as shown in the video. At this point, remove and replace the headlamp bulb with the correct type that has the same fitting (in this case, H4). Finally, reassemble the optical unit and secure the metal frame!

Watch the video!


by ScegliAuto

More videos