Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Model: Gasgas Txt 125
Part:

In order to replace the flywheel of the GasGas TXT 125, you need to remove the engine block from inside its housing at the center of the frame: once the engine block has been completely removed, you can loosen the side cover of the engine block. The underlying flywheel can be removed by loosening the screws that fasten it to the engine shaft: this way you can insert the new replacement part. At this point, you can reinsert the engine block into the center of the frame, connecting it to all the pipes and verifying that it functions correctly.

Posted on 22 July 2024 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Exhaust on a GasGas TXT 125
How to Replace the Exhaust on a GasGas TXT 125
Txt 125 You can replace the exhaust on the GasGas TXT 125 by loosening the screws that secure the exhaust end can to the appropriate supports: these are loca…
How do you replace the exhaust pipe of the GasGas TXT 125?
How do you replace the exhaust pipe of the GasGas TXT 125?
Txt 125 In order to replace the exhaust pipe of the GasGas TXT 125, you need to loosen the screws that hold it to the corresponding supports, which are locat…
How do you replace the fork of the GasGas TXT 125?
How do you replace the fork of the GasGas TXT 125?
Txt 125 In order to replace the fork of the GasGas TXT 125, you first need to remove the front wheel of the motorcycle completely: to do this, you will need …

How to Turn Off the "V-Belt" Warning Light on a Yamaha X-MAX 400 Scooter?

In this tutorial, learn how to turn off the "V-Belt" warning light on the Yamaha X-MAX scooter's instrument panel, a very simple and quick operation. Before doing this, ensure you have completed the required maintenance, specifically replacing the drive belt. Start by inserting the key and turning on the ignition, then open the small right glove compartment and unscrew the screw for the upper cover. Once removed, locate the white connector with a jumper attached, disconnect it, wait about 10 seconds, and reconnect it. If successful, the warning light will disappear.

Watch the video!


by ScegliAuto

More videos