Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to disassemble and replace the thermostatic valve of the Geely Mk

Model: Geely Mk MK 1 - Years 2006-2023
Part: Thermostat

In this video tutorial we will see the main instructions that will allow us to disassemble and replace the thermostatic valve of the Geely Mk. First we open the engine hood and begin to disconnect the coolant circuit hose, letting it drain into a container for about ten minutes, as shown in the video. At this point we are going to unscrew the screws of the cover of our thermostat, removing and replacing the thermostatic valve with the new one (with its original spare part); then we just have to reassemble everything, finally pouring the new antifreeze liquid!

Posted on 9 May 2022 by ScegliAuto

Video tutorial

Related tutorials

How to remove the Geely Mk
How to remove the Geely Mk
Geely Mk (2006-2023 / MK 1) In this video tutorial we will see how to disassemble and replace the Geely Lk instrument cluster, following these simple steps. First we get in the …
How to replace the air filters of the Geely MK
How to replace the air filters of the Geely MK
Geely Mk (2006-2023 / MK 1) In this guide we will see the instructions on how to disassemble and replace the engine air filter and the pollen filter of the Geely MK. First of al…
How to remove the Geely MK rear door panel
How to remove the Geely MK rear door panel
Geely Mk (2006-2023 / MK 1) In today's video tutorial we will see the steps on how to disassemble the rear door panel of the Geely MK, following the instructions below. First we…

Other guides you may be interested in

How to Replace the Air Temperature Sensor on an Opel Astra

Are you having problems with the engine air temperature? Is the sensor in the engine not working anymore? Let’s see how to properly remove and replace the air temperature sensor on an Opel Astra. Open the bonnet, lift it and secure it. Disconnect the power connector of the sensor (located on the air hose) with your fingers, then remove the valve from its seat. After comparing the damaged valve with the new one, fit it onto the air hose in the engine bay. Test the car for proper operation.

Watch the video!


by ScegliAuto

More videos