Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to reset the service in the Genesis GV80?

Model: Genesis Gv80 MK 1, JX1 - Years 2020-2026
Part: Service warning light

In this tutorial, we can see how to reset the service in the Genesis GV80, an extremely simple and quick operation, to be performed only once all scheduled maintenance work has been completed. Let's start by going inside the cabin, then insert the key and turn on the instrument panel. Next, we reach the general menu on the central display, enter "Setup", "Vehicle", "Cluster", "Service interval", and perform the reset by selecting the "Reset" option at the bottom. To complete the procedure, simply restart the vehicle.

Posted on 12 December 2024 by ScegliAuto

Video tutorial

Related tutorials

How to Remove the Door Panel in a Genesis GV80?
How to Remove the Door Panel in a Genesis GV80?
Genesis Gv80 (2020-2026 / MK 1, JX1) To remove the door panel in a Genesis GV80, unscrew the mounting screws located in the handle pocket and just behind the window switch panel. Once al…
How to Change the Engine Oil of the Genesis GV80?
How to Change the Engine Oil of the Genesis GV80?
Genesis Gv80 (2020-2026 / MK 1, JX1) To change the engine oil of the Genesis GV80, disconnect the fasteners securing the lower protective panel of the vehicle to access the oil drain plu…
How to Replace the Remote Battery in the Genesis GV80?
How to Replace the Remote Battery in the Genesis GV80?
Genesis Gv80 (2020-2026 / MK 1, JX1) As shown in this tutorial, replacing the remote battery in the Genesis GV80 is a very simple and quick task. You will need a small flathead screwdriv…

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos