Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Battery in the Genesis GV80 Key Fob

Model: Genesis Gv80 MK 1, JX1 - Years 2020-2026
Part: Key

In this short guide, you will find the steps to disassemble and replace the battery in the key fob for the Genesis GV80. First, take your key fob and use something thin and pointed to pry on the sides to remove the back cover, opening the fob into two parts, as shown in the video. Then, remove the small battery and replace it with a new one of the correct type (in this case, a CR 2032 3V). Now, insert the new battery in the correct orientation and reassemble everything by applying the reverse procedure!

Updated on 4 July 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Remote Battery in the Genesis GV80?
How to Replace the Remote Battery in the Genesis GV80?
Genesis Gv80 (2020-2026 / MK 1, JX1) As shown in this tutorial, replacing the remote battery in the Genesis GV80 is a very simple and quick task. You will need a small flathead screwdriv…
How to Open the Rear Hatch of the Genesis GV80?
How to Open the Rear Hatch of the Genesis GV80?
Genesis Gv80 (2020-2026 / MK 1, JX1) To open the rear hatch of the Genesis GV80, you can use different methods: first, press the button located at the base of the rear windshield wiper; …
How to reset the service in the Genesis GV80?
How to reset the service in the Genesis GV80?
Genesis Gv80 (2020-2026 / MK 1, JX1) In this tutorial, we can see how to reset the service in the Genesis GV80, an extremely simple and quick operation, to be performed only once all sch…

Other guides you may be interested in

How to reset the tyre pressure warning light on the Suzuki Jimny?

To reset the tyre pressure warning light on the Suzuki Jimny, first inflate the tyres to the pressure value indicated on the corresponding sticker: this is located at the bottom of the driver's door pillar. Once the tyres are inflated, insert the ignition key and turn on the instrument panel: select the screen that indicates the tyre pressures, checking that the values change. After a few seconds, the tyre pressure warning light will automatically turn off.

Watch the video!


by ScegliAuto

More videos