Do it yourself
Frequently asked questions about cars and motorcycles
  1. Car
  2. :
  3. Genesis
  4. :
  5. Gv80
  6. : How to change the key battery on the Genesis Gv80

Genesis Gv80 - Video tutorial

Model: Genesis Gv80 JX1, MK 1 - Years 2020-2024
Part: Key
Operation: How to change the key battery on the Genesis Gv80

In this description below we can find information on how to replace the battery of the remote control key of this car. To do this we need to use a small screwdriver, first of all lever on the side of the remote control to release the rear cover of the key itself. Under it we can identify the compartment containing the battery that we can open by unscrewing the two small screws. Once the cover has been removed, we can extract the battery and replace it with the new one by positioning the latter with the positive pole facing upwards. Take out the small battery cover again and screw in its fixing screws and finally reattach the remote control cover.


Posted on 24 May 2022 by ScegliAuto

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos