Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions

How to replace the Genesis G70 oil and oil filter

Model: Genesis G70 MK 1 - Years 2018-2025
Part: Engine

To change the oil and the oil filter on the car, proceed as follows: lift the car and open the bonnet, then unscrew the oil top-up cap. Under the engine compartment, locate the flap to be removed on the soundproofing panel which allows access to the filter. Use a socket wrench to unscrew the oil filter after placing a container to collect the used oil. Then extract the filter from its housing and take the new filter (always first check the filter specifications that are suitable for the type of car). Replace the filter cap O-ring and place the new filter into the housing. Then locate the oil drain plug on the side of the sump and unscrew it and wait for all the oil to drain. Then screw the cap back on and put the filter cap back on and screw them back on. Then refit the soundproofing panel cover. Finally, proceed from the engine compartment, to filling with the new lubricant.


Posted on 14 August 2024 by ScegliAuto



Oil change and oil filter replacement for the Genesis G70
Genesis G70 (2018-2025 / MK 1) Today's main steps will allow us to carry out the routine maintenance of the Genesis G70, replacing the engine oil and oil filter. First, we lift the
How to change the oil in the Genesis G70
Genesis G70 (2018-2025 / MK 1) In this video we will show you how to change the oil in the Genesis G70. Raise the car on a bridge or with a jack. Now unscrew the cap located at the
How to reset the oil light on the Genesis G70 2023
Genesis G70 (2018-2025 / MK 1) In the following guide, we will discover together how to quickly and safely perform a manual reset of the oil light on the dashboard of your 2023 Gen

Other guides that may interest you

Resetting the tire pressure warning light on the Toyota Aygo

The activation of the tire pressure warning light indicates a possible puncture in one or more tires; let's see how to reset the TPMS sensors on the Toyota Aygo. Once the operating pressures have been restored, it will be possible to reset the TPMS warning light; to do this, get into the car and turn on the instrument panel, then go to the vehicle settings until you reach the tire pressure option, as shown in the video. At this point, hold down the "ok" button until the TPMS sensors are recalibrated, thus resetting the tire pressure warning light!

Watch the video!


by ScegliAuto

More videos