Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Oil change and oil filter replacement for the Genesis G70

Model: Genesis G70 MK 1 - Years 2018-2025
Part: Oil filter

Today's main steps will allow us to carry out the routine maintenance of the Genesis G70, replacing the engine oil and oil filter. First, we lift the car and start by removing the lower plastic cover of the engine, unscrewing all the fixing screws; then we unscrew the oil drain plug found on the oil pan, letting it drain into a container for about ten minutes. At this point, we unscrew the oil filter cartridge with the appropriate wrench, always located under the car; we screw it by hand and tighten it gently, finally topping up with new oil!

Posted on 22 August 2025 by ScegliAuto

Video tutorial

Related tutorials

How to Reset the Service on Genesis G70
How to Reset the Service on Genesis G70
Genesis G70 (2018-2025 / MK 1) In this video tutorial, you will see how to reset the service on a Genesis G70. First, perform maintenance on the vehicle, such as changing the oil f…
Replacing the Cabin Air Filter on the Genesis G70
Replacing the Cabin Air Filter on the Genesis G70
Genesis G70 (2018-2025 / MK 1) In this brief and simple guide, you will see the steps to remove and replace the cabin air filter on the Genesis G70. First, get inside the vehicle o…
How to Reset the Oil Light on the 2023 Genesis G70
How to Reset the Oil Light on the 2023 Genesis G70
Genesis G70 (2018-2025 / MK 1) In this guide, learn how to quickly and safely perform a manual reset of the oil light on the dashboard of your 2023 Genesis G70. First, start the in…

Other guides you may be interested in

How to reset the tyre pressure warning light on the Suzuki Jimny?

To reset the tyre pressure warning light on the Suzuki Jimny, first inflate the tyres to the pressure value indicated on the corresponding sticker: this is located at the bottom of the driver's door pillar. Once the tyres are inflated, insert the ignition key and turn on the instrument panel: select the screen that indicates the tyre pressures, checking that the values change. After a few seconds, the tyre pressure warning light will automatically turn off.

Watch the video!


by ScegliAuto

More videos