Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Genesis
    3. :
  3. G70
    4. : How to replace the Genesis G70 oil and oil filter

Genesis G70 - Video tutorial

Model: Genesis G70 MK 1 - Years 2018-2024
Part: Engine
Operation: How to replace the Genesis G70 oil and oil filter

To change the oil and the oil filter on the car, proceed as follows: lift the car and open the bonnet, then unscrew the oil top-up cap. Under the engine compartment, locate the flap to be removed on the soundproofing panel which allows access to the filter. Use a socket wrench to unscrew the oil filter after placing a container to collect the used oil. Then extract the filter from its housing and take the new filter (always first check the filter specifications that are suitable for the type of car). Replace the filter cap O-ring and place the new filter into the housing. Then locate the oil drain plug on the side of the sump and unscrew it and wait for all the oil to drain. Then screw the cap back on and put the filter cap back on and screw them back on. Then refit the soundproofing panel cover. Finally, proceed from the engine compartment, to filling with the new lubricant.


Posted on 17 November 2022 by ScegliAuto

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos