Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Guide to disassembling the dashboard of the Genesis G80

Model: Genesis G80 MK 2, DH - Years 2016-2020
Part: Dashboard

Today's main instructions will show us how to disassemble and replace the center console of the dashboard of the Genesis G80. First, we get on board the car and start by disassembling and removing the stock radio and the climate control panel, removing the plastic cover and unscrewing all the fastening screws; then we disconnect all the electrical connectors found on the back, as shown in the video. At this point, we remove all the other components of the center console, repairing or replacing them, and finally reassemble everything!

Posted on 6 July 2024 by ScegliAuto

Video tutorial

Related tutorials

How to replace the air filter in the Genesis G80
How to replace the air filter in the Genesis G80
Genesis G80 (2016-2020 / MK 2, DH) In today's video we see how to replace the air filter in the Genesis G80. This operation is very simple and can be performed independently as you wil…
How to replace the battery of the Genesis G80
How to replace the battery of the Genesis G80
Genesis G80 (2016-2020 / MK 2, DH) Let's see in this guide how to disassemble and replace the battery of the Genesis G80, in simple and quick steps. First of all we open the tailgate o…
Where is the fuse box of the Genesis G80
Where is the fuse box of the Genesis G80
Genesis G80 (2020-2026 / MK 3, RG3) In the following guide dedicated to your Genesis G80 third series (year 2020-2023) we will find out where all the various vehicle fuses are located. …

How to Replace the Fan Resistor on a Renault Scenic

How to replace the fan resistor on a Renault Scenic. In this video, learn how to perform the disassembly: use a lever to remove the plastic under the glove compartment, and unscrew the cover (where the resistor is located) with a screwdriver. Disconnect the large connector of the resistor, then pull it out from the cabin. Insert a new fan resistor (connect the power connector). Finally, refit the cover and tighten the screws. Check the correct assembly of the previously fitted parts and test the correct operation of the fan.

Watch the video!


by ScegliAuto

More videos