Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
The instructions in this guide will show us how to disassemble and replace the headlight bulb of the Gilera Fuoco scooter. First, we put the scooter on the central stand and start by disconnecting the electrical connector of the bulb, accessing it from the inside of the wheel arch; then we remove the protective cap and rotate the bulb to remove it from the headlight assembly, as shown in the video. At this point, we proceed to install the new low beam bulb, of the correct type and having the same attachment; we make the connection and verify the operation!

Posted on 9 September 2024 by ScegliAuto

Video tutorial

Related tutorials

Replacing Stop Lights on Gilera Fuoco
Replacing Stop Lights on Gilera Fuoco
Fuoco Today, we will show you a very simple operation that many do not know, fearing it is a complex procedure: replacing the stop lights on the Gilera Fuo…
How to Replace the Clutch on the Gilera Fuoco 500?
How to Replace the Clutch on the Gilera Fuoco 500?
Fuoco To replace the clutch on the Gilera Fuoco 500, unscrew the bolts securing the cover near the rear wheel on the left side of the bike. By removing the…
How to Change the Belt and Rollers on a Gilera Fuoco 500
How to Change the Belt and Rollers on a Gilera Fuoco 500
Fuoco In this tutorial, you will learn how to disassemble and replace the belt and rollers on a Gilera Fuoco 500, following these simple steps. First, plac…

How to Replace the Rear View Mirror on a Honda Forza

To replace the rear view mirror on a Honda Forza, use a screwdriver to lever under the front cover of the fairing to detach it. Underneath, you will find the bolts securing the windscreen and its support: by removing these, you can access the screws holding the rear view mirror. Unscrew these screws and disconnect the connectors attached to the mirrors, allowing you to completely remove them and install the new ones: these must be connected to the connectors, positioned in their place, and secured with the appropriate bolts.

Watch the video!


by ScegliAuto

More videos