Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Gilera Fuoco - Video guides

Gilera Fuoco
Guide to Replacing the Rear Light of the Gilera Fuoco
This guide shows you the procedure for removing and replacing the rear light and its bulbs on the Gilera Fuoco scooter. First, place the scooter on its centre …Read all…
Posted on 23 October 2026 by ScegliAuto
Gilera Fuoco
How to Replace the Front Headlight Bulb of the Gilera Fuoco
The instructions in this guide will show you how to remove and replace the front headlight bulb of the Gilera Fuoco scooter. First, place the scooter on the …Read all…
Posted on 23 October 2026 by ScegliAuto
Gilera Fuoco
How to Top Up the Roll Lock Oil on a Gilera Fuoco 500
To top up the roll lock oil on a Gilera Fuoco 500, loosen the screws that secure the windscreen at the front of the bike, followed by those that secure the …Read all…
Posted on 11 August 2026 by ScegliAuto
Gilera Fuoco
How to Change the Belt and Rollers on a Gilera Fuoco 500
In this tutorial, you will learn how to disassemble and replace the belt and rollers on a Gilera Fuoco 500, following these simple steps. First, place your …Read all…
Posted on 6 August 2026 by ScegliAuto
Gilera Fuoco
How to Replace the Clutch on the Gilera Fuoco 500?
To replace the clutch on the Gilera Fuoco 500, unscrew the bolts securing the cover near the rear wheel on the left side of the bike. By removing the cover, …Read all…
Posted on 9 July 2026 by ScegliAuto
Gilera Fuoco
Replacing Stop Lights on Gilera Fuoco
Today, we will show you a very simple operation that many do not know, fearing it is a complex procedure: replacing the stop lights on the Gilera Fuoco. To do …Read all…
Posted on 5 May 2026 by ScegliAuto

How to Remove the Toll Tag Holder from the Car Windscreen

The toll tag holder is usually attached to the car windscreen to ensure that the toll tag functions immediately when passing through barriers. However, if you decide to remove the holder, you should follow this procedure: - Insert the toll tag into the holder; - Pull the holder inwards to detach it from the windscreen; you can use a glass scraper or a stiff plastic card to assist you; After removing the holder, it is essential to remove the adhesive from the windscreen. To remove the adhesive, we recommend using a solvent-based spray that will remove the glue without clouding the area.

Watch the video!


by ScegliAuto

More videos