Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Model: Gilera Fuoco
Part: Tail light

Today's guide will show us the process of disassembling and replacing the rear headlight with its bulbs of the Gilera Fuoco scooter. First, we put the scooter on the center stand and start by opening the seat; then we unscrew the screws of the headlight plastics, disconnecting the electrical connector of the bulbs to remove it from the rear tail, as shown in the video. At this point, we install the new rear headlight, of the correct type, fixing it properly and then checking its operation; we reassemble all the plastics and finally close the seat!

Posted on 11 September 2024 by ScegliAuto

Video tutorial

Related tutorials

How to replace the headlight bulb of the Gilera Fuoco
How to replace the headlight bulb of the Gilera Fuoco
Fuoco The instructions in this guide will show us how to disassemble and replace the headlight bulb of the Gilera Fuoco scooter. First, we put the scooter …
Replacing Stop Lights on Gilera Fuoco
Replacing Stop Lights on Gilera Fuoco
Fuoco Today, we will show you a very simple operation that many do not know, fearing it is a complex procedure: replacing the stop lights on the Gilera Fuo…
How to Replace the Clutch on the Gilera Fuoco 500?
How to Replace the Clutch on the Gilera Fuoco 500?
Fuoco To replace the clutch on the Gilera Fuoco 500, unscrew the bolts securing the cover near the rear wheel on the left side of the bike. By removing the…

How to Replace the Front Headlight on the BMW F800GS

In this tutorial, you will see how to replace the front headlight on the BMW F800GS, an extremely simple and quick operation. First, ensure the key is not inserted for safety, then locate the power connector at the back of the headlamp and disconnect it by pressing the clip. Next, unscrew the two side bolts using a Torx T40 key, grasp the headlight and pull it away from the support. At this point, you can insert the replacement, tighten the two bolts, and reconnect the power connector.

Watch the video!


by ScegliAuto

More videos