Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
In order to replace the oil filter of the Gilera Nexus 500, you will need to locate it in the central lower part of the motorcycle: this piece can be removed from its housing by grasping the filter and turning it counterclockwise so that it can be completely unscrewed from its seat. Before inserting the new filter, you will need to sprinkle its top with a little of the new engine oil used for topping up: once the filter is oiled, it can be inserted into its seat and screwed in correctly. After installation, you can verify that everything is functioning properly.

Posted on 13 September 2024 by ScegliAuto

Video tutorial

Related tutorials

How to Change the Engine Oil and Oil Filter on the Gilera Nexus 500
How to Change the Engine Oil and Oil Filter on the Gilera Nexus 500
Nexus 500 Briefly review the main steps to perform the routine maintenance service by replacing the engine oil and oil filter on the Gilera Nexus 500 scooter. …
How to Change the Oil on a Gilera Nexus 500
How to Change the Oil on a Gilera Nexus 500
Nexus 500 How do you change the oil and oil filter on a Gilera Nexus 500? Follow this guide to proceed with the replacement. Position the scooter on the centre…
How to Change the Engine Oil and Oil Filter on a Gilera Nexus 500
How to Change the Engine Oil and Oil Filter on a Gilera Nexus 500
Nexus 500 This guide outlines how to perform routine maintenance by changing the engine oil and oil filter on a Gilera Nexus 500. First, place the scooter on t…

How to Replace the Front Headlight on the BMW F800GS

In this tutorial, you will see how to replace the front headlight on the BMW F800GS, an extremely simple and quick operation. First, ensure the key is not inserted for safety, then locate the power connector at the back of the headlamp and disconnect it by pressing the clip. Next, unscrew the two side bolts using a Torx T40 key, grasp the headlight and pull it away from the support. At this point, you can insert the replacement, tighten the two bolts, and reconnect the power connector.

Watch the video!


by ScegliAuto

More videos