Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to dismantle the engine of the Gilera DNA 50?

Model: Gilera Dna 50
Part: Engine

This video is currently unavailable

To dismantle the engine installed on the Gilera DNA 50, loosen the screws that secure it to its mounts, allowing you to remove it while disconnecting the connectors. Once the engine is free, unscrew the bolts that secure the cylinder to the top of the engine to access the piston underneath.

The piston can now be detached from the corresponding connecting rod, allowing you to open the lower crankcase and access the additional internal components. This will enable you to replace the internal components, reassembling all the parts that were just removed.


Updated on 26 October 2026 by ScegliAuto


Related tutorials

How to Remove the Engine from the Gilera DNA 50?
How to Remove the Engine from the Gilera DNA 50?
Dna 50 The procedure for removing the engine from the Gilera DNA 50 involves taking the engine out of its housing by unscrewing the fixing bolts and disconn…
How do you disassemble the engine of the Gilera DNA 50?
Dna 50 In order to disassemble the engine of the Gilera DNA 50, you will need to loosen the screws that fasten it to the appropriate supports in the center …
How do you disassemble the engine of the Gilera DNA 50?
How do you disassemble the engine of the Gilera DNA 50?
Dna 50 On the Gilera DNA 50, to disassemble the engine, it is necessary to remove the engine from inside its housing in the center of the frame, unscrewing …

How to Change the Engine Oil and Oil Filter on a Keeway RKF 125

Today, we will go through the steps to perform routine maintenance by changing the engine oil and oil filter on a Keeway RKF 125. First, place the bike on a stand and start by unscrewing the oil drain bolt located under the engine, allowing it to drain into a container for about ten minutes. Unscrew the screws of the oil filter cover, removing and replacing the cartridge with a new one as shown in the video. At this point, unscrew the filler cap and pour in the new engine oil; start the engine and check that the level is at the maximum mark.

Watch the video!


by ScegliAuto

More videos