Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
  1. Motorcycles
    2. :
  2. Gilera
    3. : Smash 110
It will be possible to replace the engine oil of the Gilera Smash 110 by loosening the drain plug of the oil pan, which will be located in the central lower part of the vehicle: once the plug is removed, it will be possible to drain the used oil into a properly positioned container. After the complete drainage of the oil, it will be possible to remove the corresponding filter from the bottom of the vehicle to replace it with a new one. At this point, the procedure can be completed by topping up the necessary amount of oil through the vent on the right side of the motorcycle.

Posted on 7 April 2025 by ScegliAuto

Video tutorial

Related tutorials

How do you replace the motor oil of the Gilera Smash 110?
How do you replace the motor oil of the Gilera Smash 110?
Smash 125 In order to replace the motor oil of the Gilera Smash 110, you need to loosen the drain plug of the oil pan: this plug will be located in the central…
How do you disassemble the engine of the Gilera Smash 110?
How do you disassemble the engine of the Gilera Smash 110?
Smash 125 In order to disassemble the engine of the Gilera Smash 110, you need to loosen the screws that fix the supports to their housing: by doing this, you …
How to Change the Engine Oil of the Gilera Smash 125
How to Change the Engine Oil of the Gilera Smash 125
Smash 125 Today, let’s go through the steps to perform the routine maintenance service by changing the engine oil of the Gilera Smash 125. First, place your sc…

How to Replace the Headlight Bulbs on the KTM RC 200?

As shown in this tutorial, replacing the headlight bulbs on the KTM RC 200 is an extremely simple and quick task. First, ensure that the key is not inserted for safety. Then, approach the headlight in question, locate the bulb holder, and turn it slightly counter-clockwise. Once done, disconnect the power connector, attach the new bulb, and reassemble everything. Avoid touching the glass of the replacement bulb directly with your bare hands, as any residues could cause it to overheat.

Watch the video!


by ScegliAuto

More videos