Do it yourself
Frequently asked questions about cars and motorcycles
To replace the stator of the Gilera Runner 50, you need to loosen the screws that secure the circular cover panel located on the right side of the bike, right in front of the corresponding exhaust: once this panel is removed, you can extract the stator underneath so that it is disconnected from its cables. You can then insert the new replacement part into the corresponding seat: once the new stator is inserted, you can connect it and verify that everything is functioning correctly.

Posted on 1 May 2025 by ScegliAuto

Video tutorial

Related tutorials

Runner 50 To replace the instrument cluster on a Gilera Runner 50, loosen the screws that secure the front panel of the bike. Once the panel is released, you c…
Runner 50 To replace the transmission on a Gilera Runner 50, first loosen the screws securing the cover on the left side of the rear wheel. Once these screws a…
Runner 50 To replace the transmission on the Gilera Runner 50, loosen the screws that secure the cover on the left side of the rear wheel: once these screws ar…

How to Replace the Battery in a Yamaha FZ6?

Replacing the battery in the Yamaha FZ6, as shown in this tutorial, is a very simple and quick operation. First, ensure that the key is not inserted, then remove the rider's seat and, using a 10mm socket spanner, loosen the bolt on the tank hinge. Next, unscrew both the front bolts and the fairing mounting bolts, lift the entire tank, and disconnect both terminals starting with the negative. At this point, you can remove the upper plastic plate, take the battery out of its housing, and fit the replacement.

Watch the video!


by ScegliAuto

More videos